Touch Controller Large Size Walk in Programmable Temperature and Humidity Test Chamber
Brief Introduction:
Programmable temperature and humidity test chamber simulates a full range of temperature and humidity conditions to test reliability, durability, climatic, freezing resistance, quality assurance, thermal endurance etc.
Temperature humidity walk in test chamber is used for providing large parts of the finished products, semi-finished products, large temperature and humidity test environmental equipment to the industry.
Application Range:
※ Electronics, Electrical appliances, Sensors
※ Semiconductor, PCB, LCD & LED
※ Medicals tests
※ Mechanical, Military, Aerospace products
※ Vehicles, Transport, Automobile supply industries
※ Chemicals, Petrochemical industries
※ Building materials, Plastics, Textile industries
※ Testing metal related industries like plating etc.
※ Instrumentation
iTemp Series Products Conform Following Standards:
※ IEC60068-3-5-2002 Environmental testing-Part 3-5 Support documentation and guidance-Confirmation of the performance of temperature chambers※ IEC6068-3-6-2002 Environmental testing-Part 3-6 Supporting documentation and guidance – Confirmation of the performance of temperature/humidity chambers.
※ IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
※ IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
※ MIL-STD-202F (GJB360.8-87) High temperature life testing
※ MIL-STD-810D (GBJ150.3) High temperature method
※ MIL-STD810D (GBJ150.4) Low temperature method
※ IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method
※ IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method
※ MIL-STD-810D (GJB150.9-93) Moist heat testing method
Optional Accessories:
※ Cable Port
Size of cable port is available for Ф100mm
※ Water purifier RO: 80
Continuously provide purified water for humidifying heater and wet-bulb
※ Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (10℃, 15%RH) for electrostatic reliability tests.
※ Defrosting Device
The chamber automatically detects and melts the frost on the evaporator when operating below 0℃ in order to allow continuous operation.
※ Electronic humidity sensor
Precision Humidity Sensor with stainless steel protection tube
Technical Specifications:
| Control Mode |
Balanced Temperature and Humidity Control System |
| Operating Temp. & Humid. Range |
+5℃ ～ +35℃; <85%R.H. |
| Internal Dimension |
2 * 2 * 2m = 8m3 |
| Temp. Range |
-20℃ ~ +100℃(150℃) |
| Humid. range |
20% ～98%R.H. |
| Temp. & Humid. Fluctuation |
±0.5℃; ≤2%R.H. |
| Temp. & Humid. Uniformity |
≤2.0℃; ≤3%R.H. |
| Temp. & Humid. Resolution |
0.01℃; 0.1%R.H. |
| Temp. Heating Up Time |
0℃ ~ +100℃within 30min;
-20℃ ~ +150℃within 45min
|
| Temp. Pull Down Time |
20℃ ~ -40℃within 60min;
20℃ ~ -70℃within 85min
|
| Power Supply |
AC380V, 50/60HZ, Three-phase (Specified by User) |
| Exterior Material |
Stainless steel with baking paint |
| Interior material |
SUS304# Stainless steel |
| Insulation material |
Rigid Polyurethane foam |
| Refrigeration System |
Mechanical cascade refrigeration system;
Fin type radiator
|
| Circulation system |
Mechanical convection system |
| Humidification Water Supply |
Automatic water regulating, recoverable supply system, water shortage alarm system |
| Water Quality |
Distilled water only, 20L Water tank capacity |
| Controller |
Touch Screen Controller |
| Safety Devices |
Overheat protector Switch, Compressor overload protector Switch, water shortage protector Switch, Humidifier protector Switch, Fault alarm system
|
| Accessories |
Viewing window, Chamber Illumination, Cable port ø50mm,
Product shelf slides 2 pieces, Universal casters
Touch screen controller HL-1000
|
Note:
1, The performance values are no specimen inside the test area.
2, At 20℃ ambient temperature, relative humidity 65%RH, rated voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.
Features:
※ Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel with excellent heat resistance and easy to clean.
※ Touch screen controller HL-1000 is designed to save chamber programming and setup time with temperature limit and alarm to protect your products.
※ Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
※ RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
※ Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions.
※ Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
※ Left side of chamber with diameter 50mm cable port for power-on test.
※ Optional electronic humidity sensor is used on all test chambers for precision humidity measuring and minimal maintenance.
Product Tags:
|
|
Touch Controller Large Size Walk in Programmable Temperature and Humidity Test Chamber Images
|
